Boltherm 124 Ignif

thermal insulation boltherm 124

Thermal insulation composed of double aluminum blade without protection and air bubble.

Flame retardant.

Main Applications
Suitable use in: Roofs and Walls

Main Benefits
The reflective aluminum capacity in conjunction with the large amount of air trapped inside their cells makes it an effective insulation. Flame retardant.

Thickness (mm)5
Presentation – (m2)50
Length x width (m)50/12.5 x 1.20
Weight (g/m2)330
Emission factor (%)5
Thermal Resistance1.26 m2 .° C/h Kcal
Reflectance (%)95
Thermal conductivity (W/mk)0.028
Maximum compression (kg/m2)1000

The appropriate treatment of the covers is one of the most important steps to ensure the thermal efficiency of buildings. The process of boltherm insulation goes against heat transfer: – for radiation, which is an essential component of energy transferred through the covers (particularly in summer, when you can get up to 93%); – by conduction and convection, due to the air bubble in the material and the process of assembling, with dual air box (2 cm deep, at least).

About/Plate Slab

thermal insulation on board

Any insulation placed in low tile must always obey the installation instructions so as not to compromise the effectiveness of your application.

1. fixing of retractor upwards

2. Boltherm placement in longitudinal direction

3. coverage Treated


Walls and ceilings

The treatment of thermal bridges can make a difference in the correct insulation of buildings. For your flexibility and dimensions, the Boltherm products guarantee continuity of insulation, skirting all the building elements (beams, pillars, curved walls or irregularities, ...) and fixing the thermal bridges. The maintenance of air boxes (2 cm deep, at least) is an integral part of the Assembly process and the efficiency of Boltherm solutions.

Between double walls (with box)

1. application of Boltherm retractor

2. application of continuous Boltherm with air box

3. application of second wall with air box.

3. The placement of the brackets/support:
-Fixed, adjustable for height, sticking self-levelling compounds.
-The use of the base holders protection will prevent any damage occur in Boltherm isolation.

1. Boltherm 132 | 133 | PVC Retractor
2. Detail of the finishing application in double air box
3. finishing Details of the application of Boltherm on the inside

Industrial Ships

The isolation of industrial units is often overlooked, but crucial to have adequate working conditions and storage. Industrial ships are, with increasing frequency, buildings of light structure, with low thermal resistance and particularly vulnerable to the heat transfer by radiation. The Boltherm treatment process, ensuring the maintenance of air box between the structure and the insulation creates a more suitable working environment, with lower HVAC costs.

Boltherm application in Industrial Ship

Assembly process

On the beams of the structure apply:

1. Boltherm 132
2. AfastadorPVC
3. Cover plate.

Note: The reflective insulations are Boltherm a vapor barrier: should not be applied in direct contact with metal materials subject to oxidation (e.g. zinc plates), privileging always the existence of air box

Ideal for Industrial, warehouses, agricultural and Sporting Pavilions Pavilions.